Wave Curtains

Wave curtains are defined by their smooth, continuous folds. A special tape and compatible track keep the spacing regular, so the curtain looks composed whether it is open or closed. The result is modern and architectural without feeling severe — precisely why wave is one of the most versatile headings for made-to-measure curtains.

Made-to-measure wave curtains with even folds

Why choose a wave heading?

The repeated S-shaped folds create a calm rhythm and show the fabric evenly. Wave curtains work especially well across wide windows, sliding doors and full-height glazing. They also combine beautifully with understated tracks and ceiling-mounted installations.

Which fabrics work best?

Sheers, in-betweens and supple curtain fabrics usually form the most fluid waves. Linen-look, dim-out and selected blackout qualities can also work beautifully, provided the fabric has the right drape and is not excessively stiff. Pattern scale should be considered because the fabric continuously curves towards and away from the room.

Modern wave curtains on a slim track

Wave curtains and fullness

Fullness determines how generous the finished curtain looks. Too little fabric makes the wave appear flat; too much can create unnecessary volume when stacked. The correct calculation depends on the tape, runner spacing and track system, which is why the heading and finished width are considered together in a made-to-measure order.

Track and installation

Wave curtains require a compatible track with evenly spaced runners. A ceiling-mounted track gives a clean floor-to-ceiling look, while wall mounting can be useful when ceiling fixing is not possible. Allow enough space in front of the window so the folds can travel without rubbing against handles, sills or another curtain layer.

How to measure

Measure the full track width and the finished drop from the correct point on the track to where you want the curtain to end. Check the drop in several places and note any obstacles. If the track is not yet installed, first decide its position and intended overlap beside the window.

Full-height wave curtains in a contemporary interior

A modern look from ceiling to floor

Wave curtains are particularly effective when the track is fitted close to the ceiling and the fabric runs almost to the floor. The uninterrupted vertical lines make the room feel taller, while the even folds keep a wide installation visually calm. A slim track can be colour-matched to the ceiling or concealed in a recess. The effect is refined rather than fussy, making wave suitable for modern apartments, renovated period homes and relaxed, natural interiors alike.

Front wave, back wave and available depth

Each fold alternates towards and away from the room, which means a wave curtain needs clear space both in front of and behind the track. If the track sits too close to a wall, window handle or second curtain layer, the folds can flatten or rub. Check the projection before installation, especially with deep blackout fabrics or double tracks. Leaving the correct clearance allows the S-shape to remain consistent across the complete width.

One panel, a pair or multiple sections

Wave curtains do not have to be supplied as one enormous piece. A symmetrical pair is practical for a central opening, while multiple panels can match sliding-door access points or very wide glazing. The division should follow the architecture so that the joins look intentional. When closed, accurately calculated panels meet neatly; when open, each section stacks in the most useful position. Consider furniture and door use before choosing the opening arrangement.

Soft wave heading viewed across a wide window

The finished hem and daily use

A floor clearance of a few millimetres is popular for wave curtains that are opened frequently because the hem can travel without dragging. A soft break on the floor gives a more relaxed look but requires more maintenance. Regularly guide the leading edge rather than pulling the fabric itself, and use a draw rod where appropriate. This protects pale or delicate fabrics from repeated handling and helps the folds return to their regular rhythm.

How the wave system creates its shape

The wave is produced by the relationship between the curtain tape, hooks, connected runners and track. The runners remain at fixed intervals, so the fabric is guided into alternating folds rather than gathering randomly. This is why a wave curtain keeps its rhythm when closed and forms an orderly stack when open. The tape specification and hook position affect the depth and frequency of the folds; they cannot be chosen independently from the track. A larger wave looks generous and architectural but projects further into the room. A smaller wave uses less depth and may suit narrower recesses. The fabric must also have enough flexibility to curve without looking rigid. A properly calculated system looks effortless precisely because all of these technical details have already been coordinated.

Wave curtains for different interior styles

Wave is often described as modern, but it is not limited to minimalist rooms. In a clean apartment, a plain ceiling-mounted wave reinforces long architectural lines. In a softer natural interior, a linen-look fabric makes the same heading relaxed rather than severe. A fine sheer creates an almost weightless layer, while velvet or a dense dim-out quality makes the folds more sculptural. In a period home, wave curtains can simplify decorative architecture without competing with it, particularly when the track is discreet. Colour changes the character further: pale neutrals blend into the walls, deep tones frame the window, and muted colour adds personality without disturbing the regular rhythm. The heading supplies order; the fabric decides whether that order feels crisp, luxurious, casual or light.

Using wave on very wide or very tall windows

The consistent folds of a wave heading are particularly valuable across wide spans because they stop the fabric from looking uneven. On tall windows, the uninterrupted vertical movement emphasises height and gives the curtain a strong presence. However, scale increases weight, stack-back and the effect of small measuring differences. Several panels may be preferable to one oversized curtain, and the track must be suitable for the completed weight. When panels meet, the leading edges need enough overlap to look continuous. With high ceilings, consider how the curtain will be fitted, dressed and maintained. A draw rod or motorised track can make daily operation easier. The visual simplicity of wave should never disguise the practical planning required behind a large installation.

Pairing wave sheers with opaque curtains

A double wave arrangement creates one of the cleanest layered window treatments. The front or room-side track carries the decorative opaque, dim-out or blackout curtain, while the window-side track holds a sheer or in-between for daytime filtering. Both layers need enough depth to form their waves without touching. If the tracks sit too close, the folds collide and neither curtain hangs correctly. The stack-back of both layers also has to fit beside the glazing. Tonal fabrics create a calm, hotel-like result; a visible contrast highlights the depth between the two curtains. The lighter layer may stay closed for much of the day, so its texture and view-through quality deserve as much attention as the outer curtain.

Mistakes that flatten or distort wave curtains

Using an ordinary track, incompatible runners or the wrong hook spacing prevents a true wave from forming. Installing the track too close to the wall flattens the rear folds; placing a second track too close causes both layers to rub. A stiff fabric may hold awkward angles instead of smooth curves, while a very floppy quality can lose definition if the fullness is not calculated correctly. Measuring from the ceiling instead of the actual runner point can produce an incorrect drop. Pulling the curtain by one fold rather than the leading edge gradually disturbs its arrangement. Most disappointing wave installations are not caused by the idea itself, but by treating the heading as a piece of tape rather than a complete track-and-fabric system.

Maintaining the signature folds

New wave curtains may need a short settling period after transport and installation. Arrange each fold consistently from top to hem, then leave the curtains closed for a while so the fabric learns its position. Steaming may be appropriate for some qualities, but always follow the care instructions and avoid direct heat on coated or delicate fabrics. When opening and closing, use the leading edge or a draw rod and allow the connected runners to guide the curtain. Vacuum lightly with a soft upholstery attachment to remove dust without crushing the folds. If the curtains are removed for professional cleaning, mark the panels and hook positions so the original arrangement can be restored accurately.

Is a wave heading right for your window?

Choose wave when you want regular folds, contemporary simplicity and an attractive appearance both open and closed. Reconsider it when there is almost no projection space, when the fabric is exceptionally rigid, or when an existing pole must remain. Check that the track can accept connected runners and that the window handles sit behind the folds without contact. Decide whether the curtain should split centrally, follow door divisions or stack entirely to one side. View the intended fabric hanging rather than flat, because its ability to curve is fundamental to the result. When these conditions are right, wave is not merely a fashionable heading: it is a disciplined system that gives large quantities of fabric a quiet, consistent structure.

Why made-to-measure wave curtains make the difference

Ready-made curtains are produced around standard drops and fixed widths, while wave curtains should respond to the actual window, track and room. Made-to-measure production allows the panel division, fullness, finished length and heading to be calculated together. It also gives you access to a much broader choice of texture, colour and performance. The result is easier to operate, more balanced when open and properly proportioned when closed. Careful sampling and measuring take a little more thought at the beginning, but they prevent compromises that remain visible every day. For a prominent window, that accuracy is what turns fabric into a finished part of the interior.

Order fabric samples before deciding

Curtain fabric changes with scale and light, so a sample is an important part of choosing well. View it vertically against the window rather than only under artificial light or flat on a table. Check the colour in the morning, afternoon and evening, and compare the weave with your walls, flooring and furniture. Also test how much of the outside view remains visible. You can order two fabric samples free of charge; additional samples cost €5 each. This lets you compare the most relevant options at home before committing to a full made-to-measure order.

From measurements to finished curtains

Start by selecting the fabric, colour and heading that fit the room. Next, establish whether the curtains will hang from an existing track or whether the position of a new track still needs to be planned. Measure the complete finished width and drop according to our guide, using several drop measurements where necessary. We then make the curtains specifically for those dimensions, with the fullness calculated for the selected heading. Because every curtain is made to order, check all measurements, opening directions and fabric choices carefully before completing the order. Allow approximately 6–10 weeks for production and delivery. Once installed, arrange the folds by hand and let the fabric settle; substantial curtains often become smoother and more relaxed during the first days of hanging.

Frequently asked questions

Do wave curtains need a special track?

Yes. The connected runners in a compatible wave track keep the folds evenly spaced.

Can blackout curtains have a wave heading?

Often yes, although the fabric must be suitable and enough space is needed for the deeper folds.

Do wave curtains take up much space?

Their folds need more depth than a very flat heading, so track position and stack-back should be planned carefully.

Can wave curtains open in the middle?

Yes. They can be made as a pair, a single panel or several panels to suit the window.

Are wave curtains suitable for patterned fabric?

Yes, but the continuous curves affect how a pattern is seen, so scale and placement should be considered.

Can wave curtains be used on a double track?

Yes, provided there is enough distance between the tracks for both layers to form freely.

Can wave curtains hang from a pole?

A true wave requires a compatible track with connected runners; a standard decorative pole does not create the same system.

How long should wave curtains be?

Floor-skimming is practical and crisp, while a slight break creates a softer look if daily movement allows it.

Made to measure for your home

Choose your favourite fabric and create wave curtains tailored to your exact window measurements.

Explore our curtain collection | Read our measuring guide | Compare curtain headings

A little guidance goes a long way

Let’s find the right curtains for your home.

Questions about fabric, headings or measurements? We are here to help you choose with confidence.