Before you start
-
Use a metal tape measure
A metal tape measure gives the most accurate result. Fabric or flexible tapes can stretch.
-
Measure in centimetres
Enter all measurements in centimetres. Do not round your measurements up or down.
-
Measure twice
Check every measurement twice and write it down immediately to avoid mistakes.
Step 1 — Measure the width
Always measure the curtain track or pole — not just the window. Choose the situation below that applies to your room.
-
Existing curtain track
Measure the full usable length of the track from end to end. Do not measure the window itself.
-
Existing curtain pole
Measure the pole between the decorative end pieces. Do not include the finials in your measurement.
-
No track or pole yet
Measure the width of the window and add the desired overlap on both sides. We recommend at least 15–20 cm on each side where space allows.
Step 2 — Measure the drop
Decide where you want your curtains to finish. Measure the drop at the left, centre and right, as floors and ceilings are not always perfectly level.
-
To the windowsill
Measure to approximately 1 cm above the windowsill for a clean and practical finish.
-
Below the windowsill
Measure to your preferred finishing point, usually 10–15 cm below the sill. Check that there is no radiator or furniture in the way.
-
To the floor
For a neat finish, measure to approximately 1 cm above the floor. Measure at the left, centre and right and use the shortest measurement.
Please check your measurements carefully
Enter the exact measurements requested on the product page. Your curtains will be made using the measurements you provide. We do not adjust or correct these measurements afterwards.
Frequently asked questions
Should I measure the window or the track?
If a curtain track or pole is already installed, measure that — not the glass or window frame. If there is no track or pole yet, decide its final position before measuring.
Where do I start measuring the drop?
This depends on your selected heading. For a track, measure from the top or eye of the runner as specified on the product page. For a pole, measure from the point where the curtain will hang.
Do I need to add extra width for fullness?
No. Enter the requested track or pole width. The fabric allowance needed for your selected heading and fullness is calculated during production.
What if my floor is uneven?
Measure the drop at the left, centre and right. For curtains that should finish above the floor, use the shortest measurement.
What should I check around the window?
Check that the curtains can hang and move freely. Allow enough space for window handles, radiators, deep windowsills and furniture.
Ready to find your perfect curtains?
Explore our made-to-measure curtain collection and order fabric samples before making your final choice.
