Curtain Width Guide

Good made-to-measure curtains start with proportion: the relationship between the opening, track, fabric and finished drop. This guide focuses specifically on curtain width guide.

What to consider

How to determine finished curtain width from track width, overlap and fullness.

  • Measure the track or intended track position rather than relying only on the glass dimensions.
  • Check the finished drop at more than one point when floors or ceilings may not be perfectly level.
  • Leave enough side space for the curtains to stack without covering more glass than necessary.

How to make the choice work in practice

Start with the room and the way the opening is used every day. Note the direction of the light, how much privacy is required, whether a door or handle needs clear access and where the fabric can sit when the curtains are open. These practical details usually determine the right solution more accurately than style alone.

For a made-to-measure result, fabric, heading, track and dimensions should be considered as one system. Changing one part can affect the others: heavier fabric changes the way folds form, wider curtains need more stack space, and a ceiling track can make the same room feel taller than a track positioned close to the frame.

Fabric and finish

Before ordering, compare fabric samples in the actual room. Look at them in daylight and after dark, both hanging vertically and against the surrounding wall and floor colours. For privacy or light-control applications, remember that colour and weave can affect performance as well as appearance.

Made to measure or standard size?

Standard curtains can work when the opening is straightforward and the dimensions happen to suit a ready-made size. Made-to-measure curtains become particularly valuable when the window is wide, tall, asymmetrical, close to a door, or when an exact finished drop matters. They also allow the heading, fabric and fullness to be specified for the same opening instead of compromising between separate off-the-shelf components.

Getting the proportions right

With curtain Width Guide, the most reliable approach is to measure the finished curtain system rather than the glass alone. The track position, overlap, side returns, stack-back and finished drop all influence the final result. A few centimetres can change whether the curtains clear a handle, cover unwanted wall, skim the floor cleanly or drag when the room is used every day.

Measure at several points rather than assuming walls, ceilings and floors are perfectly level. This matters especially in older properties, renovated apartments and rooms with very wide openings. If the curtains will run from ceiling to floor, note any skirting boards, radiators, sockets, door frames or furniture that may affect the drop or how far the fabric can travel.

Common measuring mistakes

  • Measuring only the window instead of the intended track.
  • Forgetting the space the curtains need when fully open.
  • Using one drop measurement across a wide room without checking the floor level.
  • Choosing the heading after the measurements have already been finalised.
  • Not allowing for overlap where two curtain panels meet.

For made-to-measure curtains, it is better to decide the track, heading and desired floor finish first and then confirm the final dimensions. That sequence reduces the chance of having to compromise later.

Planning your curtains? Start with our measuring guide, compare fabric samples, and review the heading options before ordering.

A little guidance goes a long way

Let’s find the right curtains for your home.

Questions about fabric, headings or measurements? We are here to help you choose with confidence.